Toshiba SD-V57HTSU VCR Operation Setup On-ScreenDisplay OSD, On-ScreenMenus Setup, Menu Selection

VCR Operation Setup

On-Screen Display (OSD)

Set the Output Source to VCR as shown in “Selecting the Input/Output Source” on page 15.

Some of these functions appear during VCR operated.

❶ ❷		❸	❹ ❺
	PLAY	HI-FI	CH 4
	SP		STEREO

OCT 8 , SAT 2:15 PM

❻❼

❶TAPE SPEED DISPLAY

Shows the current tape speed.

❷FUNCTION DISPLAY

Indicates the current function.

❸HI-FI DISPLAY

Indicates the unit is playing back tape recorded in Hi-Fi.

❹CHANNEL DISPLAY

Indicates the selected channel (or LINE1(L1), LINE2(L2)).

❺STEREO/SAP DISPLAY (MONO is not displayed) Shows the type of audio signal received by the VCR tuner.

❻DATE DISPLAY

Shows the current date. (Month/Date/Day of the week format)

❼CLOCK/COUNT/REMAIN DISPLAY

Shows the current time, the tape counter and remaining time on the tape.

Each press of the ENTER changes the TV on-screen displays in the following sequence.

STOP	CH 4
SP	STEREO
OCT 8 , SAT	2:15 PM

2:15 PM

0:35:40

REM 1:58

Notes

The function displays remain on the TV screen for 5 seconds.

The clock (or tape counter, tape remaining) mode will remain on the screen until you press ENTER.

The tape counter and the remaining tape length indicator appear only when a cassette is inserted. Also, the remaining tape length indicator appears after any tape operation.

EASY INFORMATION

If the Extended Data Service (XDS) signals are provided
along with normal TV signal in your area or during play-
back of a tape recorded with Extended Data Service					PREPARATION
(XDS) signals, the station ID, program title, and program
details are shown on the TV screen.
When viewing a channel with Extended Data Service (XDS)
signals, press ENTER and the station ID will appear on the
TV screen. Press ENTER again and the program details will
appear on the TV screen.
When viewing a tape recorded with Extended Data
Service (XDS) signals, press ENTER twice and the pro-
gram title and program details will appear on the TV
screen.
PROGRAM DETAILS
LENGTH: Indicates the run length of a program.
TIME REMAINING: Indicates the remaining time of a
program.
RATING: Indicates the rating of the current program
(N/A, G, PG, PG-13, R, NC-17, X and Not Rated). The
rating N/A means that the motion picture ratings are not
applicable to this program.
		CH 4	PROGRAM DETAILS
SP	WABC	STEREO
			“Home video”
			LENGTH	01:00
“Home video”			TIME REMAINING	00:26
			RATING	N/A
OCT	8 , SAT	2:15 PM
			Easy Information Screen
Easy Information Screen
	(Station ID)		(Program details)

On-Screen Menus Setup

The SETUP, clock setting (CLOCK), and timer recordings (PROGRAM) are accessed conveniently with the on-screen menus, that lead you through each step. The following pages describe the on-screen menu selections available.

Menu Selection

Your VCR allows remote control adjustment of several features.

1.Press MENU and the MAIN menu will appear.

2.Select the desired menu with v/V button and then press ENTER.

Note

Menus remain on-screen for 3 minutes.

MAIN MENU

CLOCK SET (page 19)

PROGRAM (page 25)

TUNING (page 18)

SETUP (page 18)

3. Press MENU when finished.

17