DVD Operation Setup (Continued)
Parental Control
Rating DVD
Movies on DVDs may contain scenes not suitable for chil- dren. Therefore, discs may contain Parental Control infor- mation that applies to the complete disc or to certain scenes on the disc. These scenes are rated from 1 to 8, and alternatively, more suitable scenes are available for selection on some discs. Ratings are area dependent. DVD video discs may or may not respond to the parental control setting if the Area code of the disc is set wrongly. The Parental Control feature allows you to prevent discs from being played by your children or to have certain discs played with alternative scenes.
Disc Audio | 8 |
Disc Subtitle | 7 |
Disc Menu | 6 |
Rating | 5 |
Area Code | 4 |
TV Aspect | 3 |
Menu Language | 2 |
Progressive Scan | 1 |
| Unlock |
5.1 Speaker Setup | Change |
Others |
|
1.Select Rating on the Setup menu using v/V buttons in stop mode.
2.While Rating is selected, press B.
3.When you have not entered a password yet. Enter a
When you have already entered a password; Enter a
If you make a mistake before pressing ENTER, press CLEAR and enter
4.Select a rating from 1 to 8 using v/V buttons. One (1) has the most playback restrictions. Eight
(8) has the least playback restrictions.
The limitation will be more severe as the level number decreases.
Unlock: If you select Unlock, Parental Control is not active. The disc will play in full.
Ratings 1 to 8: Some discs contain scenes not suit- able for children. If you set a rating for the DVD, all disc scenes with the same rating or lower will be played. Higher rated scenes will not be played unless an alternative scene is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, play- back will stop. You must enter the
5.Press ENTER to confirm your rating selection, then press SETUP to exit the menu.
6.Press OPEN/CLOSE to activate the Parental Control. If the rating set is lower than the disc rating, a message will appear. Select “YES” if you want to continue playback and input the password followed by ENTER.
Area Code DVD
Enter the code of a area whose standards were used to rate the DVD video disc, referring to the list (See “Area Code List”, page 45).
Disc Audio | Code Set |
Disc Subtitle | U S |
Disc Menu |
|
Rating
Area Code
TV Aspect
Menu Language
Progressive Scan
5.1 Speaker Setup
Others
1.Select Area Code using the v/V buttons on the setup menu.
2.While Area Code is selected, press B.
3.Follow step 3 of “Rating” on left.
4.Select the first character using the v/V buttons.
5.Press 2 to shift to second character and select the second character using v/V buttons.
6.Press ENTER to confirm your Area code selection, then press SETUP to exit the menu.
Note
Confirmation of the
Changing the 4-digit password
1Follow Steps
2Enter the old password, then press ENTER.
3Select Change using v/V buttons then press
ENTER.
4Enter the new
ENTER.
5Enter exactly the same password a second time and verify by pressing ENTER.
6Press SETUP to exit the menu.
If you forget your 4-digit password
If you forget your password, to clear the current pass- word follow the procedure below.
1Press SETUP to display the setup menu.
2Enter the
The
3Enter a new password as shown above to the left (Rating).
PREPARATION
23