VCR Operation (Continued)
Tape Counter Memory Feature
Real-Time Counter
Shows length of tape run in hours, minutes, and seconds. Press CLK/CNT to select the
Every press of CLK/CNT changes the TV screen as illustrated below.
2:15 AM | 0:05:25 | REM 1:07 |
CLOCK | COUNTER | REMAINING TIME |
Counter changes to “0:00:00” when the cassette is ejected.
The
The
Note
During the “L1 OPT” mode, the OSD(On Screen Display) can not be changed.
Counter Memory Feature
This is useful if there is a section of tape you want to view immediately after recording or if you want to return to the same point several times.
1.Begin recording or playing a tape.
2.Press CLK/CNT repeatedly to display the
3.At the point that you want to locate later, reset the
CLEAR.
4.Continue to play or record.
5.Press STOP when recording or playback finishes.
6.Press REW (m).
The tape automatically stops when the tape counter returns to about “0:00:00”.
Tape Remaining
This function shows the remaining time on the tape during recording or playback.
Press CLK/CNT repeatedly until the REM indicator displays on the TV screen during recording or playback.
Note
The remaining tape length indicator may not be displayed correctly depending on the condition of the tape and the kind of the tape
Additional Information
In manual recording, Timer recording, Instant Timer Recording, playback, or fast forward modes, the DVD/VCR Receiver automatically starts rewinding the tape at the end of the tape. The cassette will stop at the beginning of the tape and be ejected, and the DVD/VCR Receiver will turn itself off.
After you have finished using the DVD/VCR Receiver, rewind, eject, and remove the cassette. Place the cassette in its protective sleeve to protect it from dust. It is not nec- essary to rewind the cassette before removing it, but if you do, it will be ready to play or record the next time you use it.
Be sure the DVD/VCR Receiver Channel Selector is on the correct channel you wish to record. The channel that is being recorded can always be checked by tuning the televi- sion to the DVD/VCR Receiver channel (3 or 4) and press- ing the VCR button to set the DVD/VCR Receiver to VCR mode (VCR appears in the display window).
Do not attempt to hook up more than one television set to the DVD/VCR Receiver for either recording or playback.
Auto Play System
This DVD/VCR Receiver features automatic playback. Load a cassette (with the safety tab removed).
The Output Source is changed to VCR mode automatically.
The power turns on automatically and playback begins.
At the end of the tape, the DVD/VCR Receiver stops and rewinds the tape.
The cassette is ejected after rewinding and the VCR turns itself off automatically.
Note
Auto power off does not function during regular DVD play mode. (DVD/VCR Receiver power stays on.)
S-VHS Quasi Playback (SQPB)
This DVD/VCR Receiver can also play back a tape which is recorded in
This DVD/VCR Receiver cannot record in
SQPB is an abbreviation for
OPERATION
29
