Radio Operation (Continued)
Tuning into a Station Manually
1.Press FM/AM on the remote control until the fre- quency band appears on the display and TV screen.
2.Press FM/AM on the remote control to select the desired band.
3.Press TUNING (3/4) on the remote control to tune in the desired station.
For your reference
Weak FM stations
“ST” may flash when a weak FM stereo signal is received, select another station or realign the antenna.
To turn off the radio
Press POWER (I/1) to turn the DVD/VCR Receiver off or select another function mode (DVD or VCR).
Tuning into a Station Automatically
Hold down TUNING (3/4) on the remote control for 1 or 2 seconds, and a station is searched for automatical- ly.
Note
The search may not stop at a station with a very weak signal.
Labeling Stations
1. Press 2 to move to the station name column.
- - - - - - - RADIO - - - - - - - 6/10
FM 87 . 5MHz
FM 108 . 0MHz
FM 90 . 0MHz
FM 106 . 0MHz
FM 98 . 0MHz
FM/AMTUNING
MEMORY/CLEAR
2.Use the 3/4 buttons to select the character then use the 1 /2 buttons to shift to the next or previ- ous character.
3.Press ENTER to confirm the station name.
4.Press ENTER on the remote control.
The station name is stored.
OPERATION
39