Toshiba SD-V57HTSU owner manual Speaker Setup

Speaker Setup

Adjust the following settings for the built-in 5.1 channel surround decoder.

Disc Audio

Disc Subtitle

Disc Menu	R	R
	Front L
Rating
Area Code	Volume	0 dB
	Size	Small
TV Aspect
	Distance	1 ft
Menu Language
	Test
Progressive Scan
	Return
5.1 Speaker Setup
Others

1.Select “5.1 Speaker Setup” using the 3/4 buttons on the setup menu.

2.While “5.1 Speaker Setup” is selected, press 2 button.

3.Press 2 buttons to select the desired speaker.

4.Adjust options by using 341 2 buttons.

Speaker selection

Select a speaker that you want to adjust. ((Front speak- ers (Left), Centre Speaker, Front speakers (Right), Rear speakers (Left), Rear speakers (Right), or Subwoofer))

Note

Certain speaker settings are prohibited by the Dolby Digital licensing agreement.

Volume

Press 1 / 2 to adjust the output level of the selected speaker. (-6dB ~ 6dB)

Size

Since the speaker settings are fixed, you cannot change the settings.

Subwoofer’s size is fixed “Large” and the other

speaker’s size are fixed “small”.

Distance

If you connected speakers to your DVD/VCR Receiver , setting the Distance lets the speakers know how far the sound has to travel to reach your set listening point.

This allows the sound from each speaker to reach the listener at the same time. (1~20 ft, 1 ft = 0.30 m)

Note

You can not set the distance of subwoofer speaker.

Test

Press ENTER to test the signals of each speaker. Adjust the volume to match the volume of test signals memorized in the system.

Front Left (L) → Centre → Front Right (R) → Rear Right (R) → Rear Left (L) → Subwoofer

Return

Press ENTER to return to the previous menu.

OPERATION

37