Toshiba Standard Telephone Conference Calls, To conference calls, To transfer conference control

The Basics Conference Calls

Conference Calls

You can conference together up to eight parties (including your own) - with up to six parties being external network lines. The actual number of conference parties with acceptable volume levels depends on the local and far end telephone line conditions.

The person who initiates the conference call is the Master. If, after the conference is established, the Master exits the conference, and the first station to have been added to the conference becomes the Master.

➤To conference calls

1.	While on a call, press		. You hear dial tone.			Recall
2.		Recall		Recall
	Call another station or outside line.
3.	When the called party answers, press				. If you receive a busy tone or no answer, press
	again to return to the original connection.
4.	All parties are conferenced.
5.	Repeat the above steps to add lines to the conference. Keep in mind the maximum number of allowed
	conference parties.
	Note When the “master” of the conference hangs up, control is automatically transferred to the first
	internal station added to the conference call. If no other internal stations are included in the
	conference call, the call will be disconnected.
➤ To transfer conference control
1.	Do Steps 1 and 2 above to add the line you wish to transfer conference control to. See previous Note.
2.	Announce the call and hang up to transfer the call. This station now becomes the conference “master”
	with the ability to add or delete parties.

Strata CTX Standard Telephone User Guide October 2002 5