Call Transfer | Toshiba Standard Telephone specs

Call Transfer	The Basics

Call Transfer

1.	While on a call, press	. You hear internal dial tone.	Recall
2.	party.	Recall
	Dial the extension where the call will be transferred. You can remain on the line and announce the call
	or immediately “blind transfer” the call.
	During call transfer, you can connect all three parties by pressing		.

	♦ If you get voice mail, you can leave a message or hang up and let the transferred caller leave
		a message.
	♦ If you hear a long single tone, then announce the call over the called phone’s speaker.
3.	Transfer with Camp On: If the station to which you want to transfer the call is busy, you may hang
	up and the transferred trunk or station will be camped on to the busy destination.
➤ To transfer a call directly to Voice Mail (VM)
1.	While on a call, press		.	Recall
2.	Enter	#407	Recall
		.
3.	Enter the VM mailbox number (usually the same as the extension number).
4.	Hang up (the caller is connected to the VM mailbox) or, you can press			to return to the calling

4			Strata CTX Standard Telephone User Guide October 2002

Image 13

Toshiba Standard Telephone manual Call Transfer, To transfer a call directly to Voice Mail VM

Contents

Standardtelephone Toshib a Copyright Telecomns Division Publication Information Contents Contents Iii Contents Organisation Introduction Calls attention to important instructions or information Conventions Ringing Patterns Basics Answering a Call RecallRecall on Outside Lines To recall an outside line Responding to a Message Waiting Indication Message WaitingTurning On/Off Message Waiting LED on Another Extension To transfer a call directly to Voice Mail VM Call Transfer To conference calls Conference CallsTo transfer conference control Adding Voice Mail to a Conference Connecting Two Outside Lines Verified/Non-Verified Account Codes Account Code Calls Forced Account Codes To dial using Forced Account CodesVoluntary Account Codes Verified/Non-Verified To enter a Voluntary Account Code Automatic Busy Redial To cancel Automatic Busy RedialAutomatic Callback To activate Automatic Busy Redial Station To cancel ACB Call Forward Categories Call Forward Settings To change your Pass Code Call Forward ProceduresTo use the Call Forward button sequence Feature Button Sequence Call Forward Incoming Line Calls To park a call Call Park OrbitsTo retrieve a parked call Group Pickup Call PickupPage/Internal Call Pickup To perform Call Pickup Call Waiting Do Not Disturb Direct Inward System AccessTo activate DND To deactivate DND Door Locks Setting DND for Another Extension To answer a door phone call Door PhonesTo call/monitor a door phone Override Calls Emergency RingdownBusy Override To call from a door phone Do Not Disturb Override To perform Class of Service OverrideTo use DND Override To perform Executive Override Privacy Override PagingTo make a Page Announcement to phones or external speakers To make a Group Emergency All CallTo make an All Call To answer an All Call Redial Store a Station Speed Dial Number To store a Station Speed Dial Number using an Access CodeAdvanced Speed Dial Operation Mail Direct Transfer #66 #412 Feature Access Codes #33 85#392 450 Important Safety Notes Safety Approval Safety Approval Table A-1 EU Compliance Equipment details Strata CTX100 Table A-2 Type Approval Table A-3 Network Planning Information Table A-3 Table A-4 Index IN-2