Toshiba TDP-MT200 owner manual Basic operations, Turn on the power, Activate the connected device

English Français Español Deutsch Italiano Português Svenska

Basic operations

1Turn on the power.

Turn on the power by following the instructions in “Turning the power on” p.21 .

2Select the language and the lamp power (When using the first time).

When the projector is used for the first time after purchase, menu for language and lamp power selection and configuration is displayed in English. (If the screen is out of focus, adjust it according to the step 6 .)

qUse theorbutton to select the desired language and press the button.

Message for setup confirmation is displayed in a selected language.

Then, the menu for lamp power selection and configuration is displayed. It is automatically set as Standard. To change the setting, follow the step w.

wUsing the or button, select the lamp power and press the button.

The lamp power, if selected, will be toggled without pressing the button. The display automatically disappears in a few seconds.

English

French

German

Italian

Spanish

Portuguese

Russian

Swedish

Turkish

Japanese

Chinese (simplified)

Chinese (traditional)

Korean

Notes

•When the projector is turned on the next time, the Language and Lamp power menus do not appear upon startup. However, if “Reset all” is executed from the Default setting menu p.31 , the Language and Lamp power menus will be displayed the next time when the power is turned on.

•The language can also be set via the Display setting menu p.30 and Lamp power via the Default setting menu p.31 .

•This owner’s manual assumes that English has been selected.

3Activate the connected device.

Turn on and start the connected device such as a computer.

4Press the INPUT button.

An image of the connected equipment is projected.

Each time you press the INPUT button, it switches to the input of the connected equipment.

Notes

•When [Auto input search] is set to [On] in the default setting menu p.31 , the image of the equipment which is connected and turned on is projected.

•Moving pictures generated with the DVD software for computers may appear unnatural if it is projected with this projector, but it is not a malfunction.

Operations

23