Trouble indications
The indicator lights inform you of internal abnormalities.
No power
⇒ Problem with projector
• Unplug the power cord, and contact your dealer. ⇒ The lamp cover is not properly attached.
• Unplug the power cord, and reattach the lamp cover. p.34
(Off)
| Lamp went out during use, or won’t come on | ||
| ⇒ Lamp temperature is high so that it is difficult to turn on, the lifetime of | ||
(Red lit) | the lamp has ended or the projector is malfunctioning. | ||
• | Unplug the power cord and wait for a short while, then turn the power back on. | ||
| |||
| • | If a lamp burns out, replace it with a new one. | |
| ❈ After approx. one minute of abnormal display, the projector returns to | ||
| (Red lit) | the standby state waiting for internal cool down. | |
|
| ||
| Power went out during use | ||
(Red lit or flashing) | ⇒ Internal overheating, or the outside temperature is too high. | ||
(Green lit) | • Place the projector so that the air intake and exhaust are not blocked. | ||
Or (Orange lit) | • Unplug the power cord and wait for a short while, then turn the power back on. | ||
| ❈ The | icon will appear before the power goes out. | |
(Red lit) | ❈ After approx. one minute of abnormal display, the projector returns to | ||
the standby state waiting for internal cool down. | |||
| |||
| Power went out during use | |
| ⇒ Problem with internal cooling fan. | |
(Red lit or flashing) | • Unplug the power cord, and contact your dealer. | |
Or (Orange lit) | ❈ The | icon will appear before the power goes out. |
❈ After approx. one minute of abnormal display, the projector returns to | ||
(Red lit) | the standby state waiting for internal cool down. | |
|
| Power went out during use |
(Green lit |
| ⇒ Problem inside the projector. |
| • Unplug the power cord and wait for a short while, then turn the power back on. | |
(Green lit or Off) | (Green | |
or Off) | flashing) | • If the above action will not clear the problem, unplug the power cord, |
|
| and contact your dealer. |
(Red lit) |
| ❈ After approx. one minute of abnormal display, the projector returns to |
| the standby state waiting for internal cool down. |
PRECAUTION
• Make sure to unplug the power cord if something goes wrong.
36
