Toshiba TDP-P75 owner manual Default setting menu

English

3. Default setting menu

FUNCTION	DESCRIPTION
	The projector can be installed on a ceiling or behind a screen,
Projection	or with one or more mirrors. Contact your dealer for the ceiling
	mount bracket (optional accessory) if you need to install the
mode
	projector on your ceiling.
	For more information, refer to	p.22 .
	Sets whether the projector searches automatically for input
Auto input	signals. If the source scan is on, the projector will scan for input
search	signals until it acquires a signal. If the function is not activated,
	the projector selects the last used input signal.
	Language sets the language for the OSD control menus.
	Use 3/ 4button on the projector or remote control to select
Language	your desired language from among English, French, German,
	Italian, Spanish, Russian, Traditional Chinese, Simplified
	Chinese, Japanese, and Korean.
Start-up	Enables the user to select which logo screen will appear during
	projector start-up. Three modes are available: Default (Toshiba
screen
	logo), black screen or blue screen.
	A mode used for extreme environments like high altitude. We
	recommend you set High when your environment is higher
	than 3000 feet above sea level.
	Press 3 or 4button on the projector or remote control to
	select.
	Operation under high fan mode may cause a higher decibel
Fan mode	operating noise level because of increased fan speed neces-
	sary to improve overall system cooling and performance.
	If you use this projector under other extreme environments
	excluding the above, it may display auto shut-down symptoms,
	which is designed to protect your projector from over-heating.
	In cases like this, you should switch to High fan mode to solve
	these symptoms. However, this is not to state that this projector
	can operate under any and all harsh or extreme environments.
	Set whether to turn on the power when the ON/STANDBY
Power on	button is pressed (Manual), or when the power cord is plugged
	in (Auto).

34 Operation