Toshiba TDP-P8 manual Turning the power off Press the ON/STANDBY button

Installation (Continued)

•The fi rst time you use the projector after purchase, after the start-up screen, please press “MENU” button.

Turning the power off

Press the ON/STANDBY button.

A message appears on the screen, confi rming that you wish to shut off the power. This message will disappear after a moment. (This operation is no longer valid after the message disappears.)

Press the ON/STANDBY button again.

If the screen turns off, but the internal cooling fan continues to operate for a short while. Then, the projector goes into standby mode.

When cooling lampAfter cooling complete

AB

ADuring cooling, the POWER indicator fl ashes. In this state, the power cannot be turned back on.

If you are in a hurry, there is no problem with unplugging the power cord

or turning off the power consunption in this state. In standby mode.

Note

•The projector consumes about 3-4W of power in standby. We recommend that you unplug the power cord or turn off the main power switch if you will not be using the projector for an extended period.

PRECAUTION

•If the power cord is unplugged before cooling is complete, give the lamp time (about 5 minutes) to cool before plugging it back in. If the lamp overheats, it may fail to light

25