43
About Lamp
Lamp replacement
A lamp is consumable supplies. If used for extended periods, images
will appear dark, and the lamp could burn out. This is characteristic of a
lamp, and is not malfunction. (The lifetime of the lamp depends on condi-
tion of use.) If this happens, replace it with a new one.
CAUTION
If you have been using the projector, the lamp will be very hot, and may
cause burn injuries.
Wait for the lamp to cool (for longer than 1 hour) before replacing it.
If the lamp should break, please handle with care to avoid injury due to
broken pieces and contact your dealer for repair service.
Lens cleaning
• Clean the lens with a commercially available
blower and/or lens cleaner.
• The lens is easily scratched, so do not rub it
with hard objects, or strike it.
Main unit cleaning
• Clean the main unit after unplugging the
power cord.
• Wipe dirt off the main unit gently with a soft
cloth.
• Do not wipe the main unit with a damp cloth.
Doing so may allow water to get inside, result-
ing in an electric shock or failure.
• Do not use benzene, thinner and the like as
they may deform or discolor the unit or dam-
age the paint surface.
• When using a chemically treated cloth, follow
the precautions included with the cloth.