TECRA A11/S11, Satellite Pro S500

CPU

This function allows you to set the processor’s operating mode.

Dynamic CPU Frequency Mode

This option allows you to configure the power saving modes associated with the processor - the following settings are available:

Dynamically The processor’s power consumption and automatic

Switchable clock speed switching functions are enabled - in use the processor’s operation is automatically switched when necessary (default).

Always High The processor’s power consumption and automatic clock speed switching functions are disabled - in use the processor will always run at its highest level of power consumption and its highest speed.

Always Low The processor’s power consumption and automatic clock speed switching functions are disabled - in use the processor will always run at a lower level of power consumption and a low speed.

LAN

Wake-up on LAN

This feature lets the computer’s power be turned on from shudown when it receives a wake-up packet (Magic packet) from the LAN.

Do not install or remove a memory module while Wake-up on LAN is enabled.

■The Wake-up on LAN function consumes power even when the system is off. Leave the AC adaptor connected while using this feature.

■Regarding Wake-up on LAN from sleep or hibernation, you must check the “Allow the device to wake the computer” check box within the LAN Device properties. (This feature does not effect the Wake-up on LAN from sleep or hibernation.)

Power will be automatically turned on when a signal is received from an administrator’s computer which is connected via a network.

The following settings can be changed when the Built-in LAN is Enabled.

Connect the AC adaptor when using the Wake-up on LAN function. The battery retention time will be shorter than the times listed in this manual when this function is enabled. Refer to the section in chapter 6, Extending battery life.

Enabled

Enables Wake-up on LAN from shutdown.

 

 

Disabled

Disables Wake-up on LAN from shutdown. (Default)

 

 

User’s Manual

7-5