TECRA A11/S11, Satellite Pro S500

6. Slide your fingernail or a thin object under the cover and lift it off.

1

2

1. Memory module cover

2. Screw

Figure 3-8 Removing the memory module cover

7.Align the notch of the memory module with that of the memory slot and gently insert the module into the slot at about a 45 degree angle before holding it down until the latches on either side snap into place.

1

1. Notch

2. Slot A

3. Slot B

3

2

Figure 3-9 Seating the memory module

■Never allow metal objects, such as screws, staples and paper clips, to enter the computer. Foreign metal objects can create a short circuit, which can cause computer damage and fire, possibly resulting in serious injury.

■Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems.

3-26

User’s Manual