Toshiba TECRA Cleaning the cooling module, Remove the battery pack (refer to the, Shut down the computer - make sure the

TECRA A11/S11, Satellite Pro S500

Cleaning the cooling module

This section explains how to clean the cooling module.

If you use the computer for a long period, the inside of the computer may become hot. Always allow the computer to cool to room temperature before you clean the cooling module.

To clean the cooling module, follow the steps detailed below:

1.Shut down the computer - make sure the Power indicator is off (refer to the Turning off the power section in Chapter 1, Getting Started, if required).

2.Remove the AC adaptor and all cables and peripherals connected to the computer.

3.Close the display panel and turn the computer upside down.

4.Remove the battery pack (refer to the Replacing the battery pack section in Chapter 6, Power and Power-Up Modes, if required).

5.Using a thin-tipped tool, push on the hole in the edge of the Cooling module cover and slide it in the direction of the arrow to remove.

2

1

1. Hole

2. Cooling module cover

Figure F-1 Removing the cooling module cover

User’s Manual F-3