Toshiba TECRA Mode *1, supply *1, automatic, Low battery, power off *1, HDD automatic, Keypad overlay, System automatic, Instant security, Sleep/Hibernation

	TECRA A11/S11, Satellite Pro S500
HDD automatic	This feature automatically cuts off power to the
power off *1	hard disk drive when it is not accessed for a
	specified time, with power being restored when
	the hard disk drive is next accessed. This can be
	specified in the Power Options.
System automatic	This feature automatically shuts down the system
Sleep/Hibernation	into either Sleep Mode or Hibernation Mode when
Mode *1	there is no input or hardware access for a
	specified time. This can be specified in the Power
	Options.
Keypad overlay	A ten-key numeric keypad is integrated into the
	A4 size keyboard. Please refer to the Keypad
	overlay for A4 size keyboard section in
	Chapter 5, The Keyboard, for information on
	using this feature.
Power on password	Two levels of password security, supervisor and
	user, are available to prevent unauthorized
	access to your computer.
Instant security	A specific hot key function automatically locks the
	system providing data security.
Intelligent power	A microprocessor in the computer’s intelligent
supply *1	power supply detects the battery’s charge,
	automatically calculates the remaining battery
	capacity and protects electronic components
	from abnormal conditions such as a voltage
	overload from the AC adaptor. This can be
	specified in the Power Options.
Battery save mode *1	This feature lets you configure the computer in
	order to save battery power. This can be
	specified in the Power Options.
Panel power on/off *1	This feature automatically turns power to the
	computer off when the display panel is closed,
	and turns it back on when the display panel is
	opened. This can be specified in the Power
	Options.
Low battery	When battery power is exhausted to the point that
automatic	computer operation cannot be continued, the
Hibernation Mode *1	system automatically enters Hibernation Mode
	and shuts itself down. This can be specified in the
	Power Options.
Heat dispersal *1	To protect against overheating, the processor has
	an internal temperature sensor so that, if the
	computer’s internal temperature rises to a certain
	level, the cooling fan is turned on or the
	processing speed is lowered. This can be
	specified in the Power Options.

User’s Manual 3-7