TECRA A11/S11, Satellite Pro S500

Replacing the cap

The AccuPoint cap is an expendable item that should be replaced after prolonged use. Spare AccuPoint caps are available from TOSHIBA.

1.To remove the AccuPoint cap, firmly pinch the cap and pull it straight up.

1

1. AccuPoint cap

Figure 4-2 Removing the AccuPoint cap

2. Position a new cap on the peg and press it into place.The peg is square, so be careful to align the cap’s square hole with the peg.

Using the Fingerprint Sensor

This product has a fingerprint utility installed for the purpose of enrolling and recognizing fingerprints. By enrolling the ID and password onto the fingerprint authentication feature, it is no longer necessary to input the password from the keyboard. Fingerprint feature enables you to:

Logon to Windows and access a security enabled homepage through Internet Explorer.

Files and folders can be encrypted/decrypted and third party access to them prevented.

Disable the password-protected screen-saver when returning from a power-saving mode such as Sleep Mode.

Authentication of the User Password (and, if applicable, the HDD (Hard Disk Drive) Password) when booting up the computer (boot authentication).

Single Sign-On feature

Fingerprint cannot be used in models that do not have a fingerprint module installed.

User’s Manual

4-3