3 Tests and Diagnostics 3.20 ONLY ONE TEST
Press the Toshiba Presentation button after the following message appears.
Step2 X 1 2
* * *.
Press Function button (Presentation button)
OK message appears in the display if the test ends without an error.
Press any key return to each Steps if NG! or Press any key message apprears.
If the test ends successfully, the display returns to the ONLY ONE TEST
menu.
Subtest 7 Acceleration sensor
This subtest detects and corrects the each axis (X, Y, Z).
NOTE: Make sure that this subtest is executed on the following condition:
1. Flat desk with vertical plane to get the stability of machine.
2. The vertical wall or plane is necessary.
3. Prevent the machine from shake or shock.
Vertical plane
Flat desk
Set the machine
against the vertical plane
with the Front upward
<Example>
The figure below shows the name and position of each side.
3-46 [CONFIDENTIAL] TECRA A9(S5/P5/S200) Maintenance Manual (960-633)