4.24 LCD unit/FL inverter 4 Replacement Procedures
7. Remove two glass tapes securing the LCD cable and disconnect the LCD cable from
the connector on the LCD unit.
CAUTION: When removing the LCD cable, be careful not to damage the connector.
8. Remove the following screws and LCD unit.
• M2×3C BIND screw ×4
CAUTION: When lifting up the top of the LCD unit, hold the corners of the LCD unit.
The top edge of LCD unit is sensitive area.
LCD cable
Glass tape
LCD unit
M2×3C BIND
M2×3C BIND
Figure 4-46 Removing the LCD unit
TECRA A9/TECRA S5/TECRA P5/Satellite Pro S200 Maintenance Manual (960-633) [CONFIDENTIAL] 4-73