Toshiba SATELLITE PRO S200, TECRA P5 4.15 Fingerprint sensor board

4 Replacement Procedures 4.15 Fingerprint sensor board
4.15 Fingerprint sensor board
Removing the Fingerprint sensor board
To remove the fingerprint sensor board, follow the steps below and refer to Figure 4-25 and
4-26.
1. Push the hook down and remove the fingerprint sensor board hold plate while
sliding it from the guides in the direction of the arrow in the figure below.
2. Peel off the glass tape.
Glass tape
Fingerprint sensor board hold plate
Hook
Guide
Figure 4-25 Removing the fingerprint sensor board hold plate
4-42 [CONFIDENTIAL] TECRA A9/TECRA S5/TECRA P5/Satellite Pro S200 Maintenance Manual (960-633)