4.4 Bridge media 4 Replacement Procedures
4.4 Bridge media Removing the Bridge media
To remove the Bridge media, follow the steps below and refer to Figure 4-3.
CAUTION: Before you remove the Bridge media, refer to the media’s documentation
and to your operating system documentation for proper procedures and
precautions.
1. Push the Bridge media. It will pop out partly, so pull out the card. (For an instance,
SD card is described in the figure 4-3.).
Bridge media (SD card)
Figure 4-3 Removing the Bridge media
Installing the Bridge media
To install the Bridge media, follow the steps below and refer to Figure 4-3.
1. Insert the Bridge media into the card slot.
2. Push it carefully to ensure a firm connection.
TECRA A9/TECRA S5/TECRA P5/Satellite Pro S200 Maintenance Manual (960-633) [CONFIDENTIAL] 4-11