Toshiba SATELLITE PRO S200, TECRA P5 - page 270

4.12 Optical drive 4 Replacement Procedures
TECRA A9/TECRA S5/TECRA P5/Satellite Pro S200 Maintenance Manual (960-633) [CONFIDENTIAL] 4-35
Installing the Optical drive
To install the optical drive, follow the steps below and refer to Figure 4-19 and 4-20.
1. Set the mounting plate and secure it with the following screw.
• M2×3C S-THIN HEAD screw ×1
2. Set the pushing plate and secure it with the following screws.
• M2×2.7C S-THIN HEAD screw ×2
3. Insert the optical drive into the slot and push it until it is firmly connected to the
connector on the system board.
4. Turn over the computer and secure the optical drive with the following screw.
• M2.5×6B FLAT HEAD screw ×1