Installation
10 Installation
GB TOSHIBA TF 471
Connection to PABX,obtaining a public line
The TF471 can be connected not only to
the public switched telephone network
(public line) but also to a PABX. In this
case, additional parameters have to be
entered.
With PABXs, the public line is obtained in
various ways:
• Number Dial one digit (or several
digits) in order to obtain
the public line
•Earth key Earth potential is
connected to the voice
wire(s) in order to obtain
the public line
• Flash key With this method of
obtaining the public line,
the connection circuit is
interrupted briefly.
With this method of obtaining
the public line, the connection
circuit is interrupted briefly.
When the method of obtaining a public
line has been entered, you must always
press the key ”*” before the actual
number when you dial your fax partner.
This is also applicable for saving the fax
numbers (see page 38).
EXCHANGE = PSTN Current line type is displayed
Press NO ...
...until the desired menu item appears
Confirm with YES.
Next menu item is displayed

Press STOP, return to standby

mode
Confirm with YES.
Current method of obtaining a public line
is displayed
Press NO ...
...until the desired menu item appears
AEXCHANGE = PSTN
EXCHANGE = PSTN
SET DATE & TIME ?
15.03 TEL 00
BEXCHANGE = PABX
EXCHANGE = PABX
ACCESS TYPE = DIGIT

Go to A Go to B

EXCHANGE = PABX EXCHANGE = PSTN

Go to C Go to D Go to E

Part 4

NO
NO
YES
YES
STOP
Obtaining
public line
=digit
Obtaining
public line
=earth key
Obtaining
public line
=flash