Advanced settings 61 GB
TOSHIBATF 471
Advanced settings
SET RECEIVE MODE ?
INSTALLATION ?
ALWAYS ?
3 x
6 x
LIST SETTING ?
SET AUTO JOURNAL ?
ON ERROR ?
15.03 FAX 00 Set TX report
standby mode
Press TX REPORT
alternative setting is displayed
Press NO ...
...until this menu item appears.
Confirm with YES.
SET TX REPORT ?
ON ERROR ?
ON ?
Set individual TX reports
The transmission report is printed out after
every transmission (basic setting). You can
limit the printout of the transmission report
(e.g. in order to save paper) by specifying
that it is only printed out if transmission is
defective.
Set group TX report
standby mode
Start the menu. Press ...
...until this menu item appears.
Confirm with YES.
Press NO ...
...until this menu item appears.
Confirm with YES.
Skip menu item...
Confirm with YES.
Specify the current setting
Press NO ...
• ALWAUS?
• ON ERROR?
• OFF?
...until the desired menu item appears.
(here: Transmission report only printed out
after errored transmission)
Confirm with YES.
Select whether the first page
transmitted from memory is to be
printed on the transmission report.
15.03 FAX 00
/
NO
YES
SET MULTI TX REPORT?
YES
YES
YES
YES
YES
NO
NO
NO
NO
NO
TX REPORT
CALL
DOCUMENT ID ?