43 GB

TOSHIBATF 471 Telephone Ansering Device (TAD)

Telephone Answering Device (TAD)
ERASE OGM ?
15.03 TEL 00
RECORD OGM ?
RECORDING

A

15.03 TEL 00

B

15.03 TEL 00

C

15.03 TEL 00
15.03 TEL 00
MESSAGE IS RECORDED
PLAY OGM ?
RECORDING
RECORD OGM ?
YES
OGM
OGM
STOP
TAD
OGM
YES
YES
NO
Recording, Playing andDeleting The Out-GoingMessage

Record the announcement text:

Before the telephone answering device
can be started, you must first record the
announcement text. You can record a text
with a maximum duration of 60 secondsmaximum duration of 60 seconds
maximum duration of 60 secondsmaximum duration of 60 seconds
maximum duration of 60 seconds
via the built-in microphone . Keep a
distance of approx. 30-60 cm between
your mouth and the microphone, and
speak with normal volume. Use an
informative announcement text. In
particular, indicate that the caller can
leave a message and also send a fax.

Example of announcement:

“ Good morning, this is xyz. You are able
to leave a fax or a message outside our
office hours. Please press the start key on
your fax machine or speak after the signal
tone. “
Where possible, avoid background
noise when recording the
announcement text (particularly
music), as this can result in
malfunctioning of the telephone
answering device.
If the error message MESSAGE FULL is
displayed when you are recording the
announcement text, there is not
enough memory available. In this
case, clear the message memory (see
page 44).
The telephone answering device
can only be started when the
announcement text has been
recorded.

Recording the announcement text

Standby mode

Press the OGM key

confirm...
You can now immediately start to record
the text...
End the recording: See A
Cancel the recording: See B
Play the recording: See C

Go to A Go to B Go to C

END CANCEL PLAY
END

Press OGM key

Standby mode
(Announcement text has been saved)
CANCEL

Press STOP

Standby mode
(Announcement text has not been saved)

Press TAD key...

...Key is lit
The TAD mode is displayed and the
announcement text is played back.
Playback volume can be
regulated via keys
PLAY

Clear existing and record new

announcement text

Standby mode

Press OGM key

Press NO

(Yes key: Play back current
announcement)
Confirm with YES
Confirm with YES
You can immediately start to record the
new announcement...
End recording: See A
Cancel recording: See B
Play recording: See C