Toshiba TLP-SX3500 user manual Option Menu

Multifunctional Settings (continued)

OPTION Menu (continued)

Item				Description
	Pressing the	(or the ENTER) button calls the SERVICE menu.
								SERVICE
	SERVICE Menu							FANSPEED	NORMAL
			/	buttons, and press the		(or the		AUTO ADJUST	ENABLE
	Select an item using the							LENS TYPE	AUTO
	ENTER) button to per form each function. :							LENS LOCK	TURN OFF
								GHOST	100
	FANSPEED ￿ AUTO ADJUST ￿ LENS TYPE ￿ LENS LOCK ￿ GHOST ￿ FILTER MESSAGE							FILTER MESSAGE
								: SELECT
		Select the fan speed level using the			/	buttons. : HIGH ￿ NORMAL
	FANSPEED	The HIGH ups rotation speeds of fans, though. Please use this
		function in using a projector at highlands etc.
		memo Note that the projector is noisier when the HIGH is selected.
		Select the ENABLE or the DISABLE using the					/	buttons. :
		ENABLE ￿ DISABLE
		When the ENABLE is selected, detecting a signal change to a RGB
	AUTO	signal performs the automatic adjustment of the vertical position (V
		POSITION), the horizontal position (H POSITION), the clock phase
	ADJUST	(H PHASE) and the horizontal size (H SIZE).
		Depending on conditions, such as input image, signal cable to the unit,
		environment around the unit, etc., the automatic adjustment may not
		work correctly. In such a case, please choose DISABLE to disable the
		automatic adjustment, and adjust manually.
		Select the lens type currently used using the					/	buttons. :
		AUTO ￿ 1 ￿ 2 ￿ 3 ￿ 4 ￿ 5
		Please select depending on the following.
		AUTO: automatically selects optimum mode.
SERVICE		1: for a standard lens
	LENS TYPE	2: for a fixed short throw lens

	3: for a short throw lens
	4: for a long throw lens
	5: for a super long throw lens
	memo This setting has an influence on the keystone distortion etc.
	memo About the optional lens, ask your dealer.
LENS LOCK	Select the TURN ON or the TURN OFF using the				/	buttons. :
	TURN ON ￿ TURN OFF
	Selecting the TURN ON locks the adjustment of the lens shift, the zoom and the focus.
GHOST	1. Choose a color element of ghost using the bottons				/	.
	2. Adjust the chosen element using buttons			/	to disappear ghost.
	Use the	/	button to set the timer for the interval to show the message for cleaning up the air filter.
	100h ￿ 200h ￿ 300h ￿ TURN OFF ￿ 50h
	After selecting "50h", "100h", "200h" or "300h", the message “REMINDER …” will
	appear after the timer reaches the interval time set by this operation. Please
FILTER	refer to the "FILTER TIME" item 41 and the table "Related message" 50 .
	When "TURN OFF" is chosen, the air filter cleaning message will not appear. Selecting "TURN
MESSAGE	OFF" displays the message to call an attention to disabling the air filter cleaning message.

•Please check and clean the air filter periodically, even if there is no message. If the air filter becomes blocked by dust or others, the internal temperature will rise, which could cause malfunction, or reduce the lifetime of the projector.

•It is recommended to choose "100h" in general. Please be careful with the operating environment of the projector and the condition of air filter, especially when "200h", "300h" or "TURN OFF" is chosen.

	Select the EXECUTE using the	button to reset the OPTION menu items. :
RESET	EXECUTE ￿ CANCEL
	The items of the OPTION menu are collectively returned to the initial setting. Note that
	the items “VOLUME”, “LAMP TIME”, “FILTER TIME” and “SERVICE” are not reset.

42