Setting Up (continued)
Adjusting The Projector's Elevator
WARNING • Do not touch about the lens and ventilation openings during use or immediately after use to prevent a burn.
CAUTION • Do not incline the projector rightward or leftward. Also do not incline it backward or forward exceeding 9 degrees. Exceeding these range could cause
malfunction, and could shorten the lifetime of the consumables.
•To prevent damaging the projector and injuring yourself, always hold the projector whenever using the elevator buttons to adjust the elevator feet.
You can use the elevator feet to make adjustments if the surface on which you need to set the projector is uneven or if you otherwise need to adjust the angle of projection. The adjustment range of the elevator feet is 0 to 9 degrees.
1Press and hold in the elevator buttons.
Raise or lower the projector to the desired height and
2then release the elevator buttons.
When you release the elevator buttons, the elevator feet will lock into position.
As necessary, you can also finely adjust the height of
3the projector by twisting the elevator feet by hand.
Elevator buttons
Elevator feet
Using The Lens Shift Buttons
The lens of this projector can be shifted vertically. When you want to finely adjust the picture position, use the LENS SHIFT buttons of the projector.
LENS SHIFT buttons
LASER INDICATOR
STANDBY/ON VIDEO RGB
+ | + | + |
LENS SHIFT | FOCUS | ZOOM |
– | – | – |
BLANK | ASPECT | LASER |
Projector | Remote control |
15
