Multifunctional Settings (continued)
NETWORK Menu
This projector provides the NETWORK function. If you use this function, please set up the projector according to the Network environment in which you use it.
memo If DHCP function on your Network is activated, the following operation is not normally required, because DHCP function on this projector is active as initial settings. Please see the section “Network Setting Up”.
MENU
MAIN | SETUP |
|
DHCP | TURN OFF | |
INFORMATION |
| |
INPUT | RESET |
|
AUTO |
|
|
SCREEN |
|
|
OPTION |
|
|
NETWORK |
|
|
: SELECT |
|
|
Item |
| Description |
|
|
|
|
| |
|
|
|
|
|
|
| ||
| Press the | (or the ENTER) button, then the IP |
|
|
| |||
|
| NETWORK - SETUP |
| |||||
| ADDRESS menu as right comes up. |
| IP ADDRESS |
|
| |||
|
| 192 . 168 . | 1 . | 24 |
| |||
| memo This menu will be shown only when the DHCP |
|
| |||||
|
|
|
|
|
| |||
| ESC | :RETURN | ENT | :NEXT |
| |||
| is disabled at the NETWORK menu. |
| ||||||
|
|
|
|
|
| |||
| The IP Address is identification number of the projector on the Network. | |||||||
| 1. Set the IP Address using the / buttons. |
|
|
|
|
| ||
| memo The same IP Address with other units cannot be used. |
|
|
|
| |||
| Press the | (or the ENTER) button at the IP |
|
|
|
| ||
|
|
| NETWORK - SETUP |
| ||||
SETUP | ADDRESS menu, then the SUBNET MASK menu |
|
| SUBNET MASK |
|
| ||
|
| 255 . 255 . 255 . | 1 |
| ||||
comes up. The SUBNET MASK is an address of the |
|
|
| |||||
|
|
|
|
|
|
| ||
|
| ESC | :RETURN | ENT | :NEXT |
| ||
| Network. |
|
|
| ||||
|
|
|
|
|
|
|
| |
| 2. Set the address of the Network to be used. |
|
|
| ||||
|
| NETWORK - SETUP |
| |||||
| Press the | (or the ENTER) button at the SUBNET |
| DEFAULT GATEWAY |
| |||
|
|
|
|
|
| |||
| MASK menu, then the DEFAULT GATEWAY menu |
| 255 . 255 . 255 . | 0 |
| |||
|
|
|
|
|
| |||
| comes up. The DEFAULT GATEWAY is the main | ESC | :RETURN | ENT | :NEXT |
| ||
|
|
|
|
|
| |||
| device to access outside of the Network. |
|
|
|
|
| ||
3. Set the address of the device as gateway to an outer Network.
| Select the TURN ON or the TURN OFF using the / |
| NETWORK | |
| buttons. : |
|
| DHCP |
DHCP |
|
| TURN ON | |
TURN ON | TURN OFF |
| TURN OFF | |
|
|
| ||
| If your Network doesn’t support the DHCP function, select the TURN OFF. | |||
|
|
|
|
|
| Pressing the | (or the ENTER) button displays the | ||
| INFORMATION menu. | |||
INFORMATION | IP ADDRESS | 192. 168. 1. 24 | ||
The menu shows the information about the current | SUBNETMASK | 255. 255. 255. 0 | ||
| DEFAULT GATEWAY | 255. 255. 255. 0 | ||
| Network setting as illustrated right. | MAC ADRRESS | 00. E0. 47. 03. 0C. D8 | |
|
|
| ||
|
| |||
| Select the EXECUTE using the button to reset the NETWORK menu items. : | |||
RESET | EXECUTE CANCEL |
|
| |
| All items on the NETWORK menu are returned to the initial setting. |
| ||
43
