1.4 Panel Layout
1.4.1 The Front Panel
Figure 1-1 Front Panel sketch
The Router’s LEDs are located on the front panel (View from left to right).
Name | Status | Indication | |
(Power) | Off | Power is off. | |
On | Power is on. | ||
| |||
(System) | Flashing | The Router is working properly. | |
On/Off | The Router has a system error. | ||
| |||
(WLAN) | Off | The Wireless function is disabled. | |
Flashing | The Wireless function is enabled. | ||
| |||
| Off | There is no device linked to the corresponding port. | |
(WAN), | On | There is a device linked to the corresponding port but | |
(LAN | there is no activity. | ||
| |||
| Flashing | There is an active device linked to the corresponding port. | |
| Slow Flash | A wireless device is connecting to the network by WPS | |
| function. This process will last in the first 2 minutes. | ||
|
| ||
(WPS) | On | A wireless device has been successfully added to the | |
network by WPS function. | |||
|
| ||
| Quick Flash | A wireless device failed to be added to the network by | |
| WPS function. | ||
|
| ||
| Table |
)Note:
After a device is successfully added to the network by WPS function, the WPS LED will keep on for about 5 minutes and then turn off.
- 4 -