TP-Link 4.1.1 1910011002 manual Quick Setup Wireless

TL-WR841N/TL-WR841ND300Mbps Wireless N Router User Guide

4.Click Next to continue, the Wireless settings page will appear as shown in Figure 3-12.

Figure 3-12 Quick Setup – Wireless

¾Wireless Radio - The wireless radio can only be enabled/disabled by using the WIFI ON/OFF switch on the device.

¾Wireless Network Name - Enter a value of up to 32 characters. The same name of SSID (Service Set Identification) must be assigned to all wireless devices in your network. Considering your wireless network security, the default SSID is set to be TP-LINK_XXXXXX (XXXXXX indicates the last unique six numbers of each Router’s MAC address). This value is case-sensitive. For example, TEST is NOT the same as test.

¾Region - Select your region from the drop-down list. This field specifies the region where the wireless function of the Router can be used. It may be illegal to use the wireless function of the Router in a region other than one of those specified in this field. If your country or region is not listed, please contact your local government agency for assistance.

)Note:

Limited by local law regulations, version for North America does not have region selection option.

¾Disable Security - The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the Router without encryption. It is recommended strongly that you choose one of following options to enable security.

- 17 -