TL-WR841N/TL-WR841ND300Mbps Wireless N Router User Guide

¾Secondary Connection - It's available only for PPPoE Connection. If your ISP provides an extra Connection type such as Dynamic/Static IP to connect to a local area network, then you can check the radio button of Dynamic/Static IP to activate this secondary connection.

zDisabled - The Secondary Connection is disabled by default, so there is PPPoE connection only. This is recommended.

zDynamic IP - Use dynamic IP address to connect to the local area network provided by ISP.

zStatic IP - Use static IP address to connect to the local area network provided by ISP. IP Address - IP Address - Enter the IP address provided by ISP for the secondary connection. This address is used only for accessing the local area network of the secondary connection. Subnet Mask - Enter the subnet mask provided by ISP for the secondary connection.

If you select Static IP manually, the next screen will appear as shown in Figure 3-9.

Figure 3-9 Quick Setup - Static IP

¾IP Address - This is the WAN IP address as seen by external users on the Internet (including your ISP). Enter the IP address into the field.

¾Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually 255.255.255.0.

¾Default Gateway - Enter the gateway IP address into the box if required.

¾Primary DNS - Enter the DNS Server IP address into the box if required.

¾Secondary DNS - If your ISP provides another DNS server, enter it into this field.

If you select L2TP/Russian L2TP and PPTP/Russian PPTP manually, the next screen will appear as shown in Figure 3-10and Figure 3-11.

- 15 -

Page 25
Image 25
TP-Link 4.1.1 1910011002 manual Quick Setup Static IP