TL-WR841N/TL-WR841ND
300Mbps Wireless N Router User Guide
Figure 3-6 WAN Connection Type
The Router provides Auto-Detectfunction and supports five popular ways Dynamic IP, Static IP, PPPoE/Russia PPPoE, L2TP/Russia L2TP and PPTP/Russia PPTP to connect to the Internet. It’s recommended that you make use of the Auto-Detectfunction. If you are sure of what kind of connection type your ISP provides, you can select the very type and click Next to go on configuring.
)Note:
Auto-Detect function is not suitable for Static IP, L2TP/Russia L2TP and PPTP/Russia PPTP, you need to specify the connection type manually.
3.If you select Auto-Detect, the Router will automatically detect the connection type your ISP provides. Make sure the cable is securely plugged into the WAN port before detection. The appropriate configuration page will be displayed when an active Internet service is successfully detected by the Router.
1)If the connection type detected is Dynamic IP, the next screen will appear as shown in Figure 3-7.
¾In most cases you don’t need to clone the MAC address if you have rebooted the modem with the new router, please select No, I do NOT need to clone MAC address.
¾If you can’t get the Internet connection after Quick Setup, please run it again and select YES, I need to clone MAC address.
Then click Next and Figure 3-12will appear.
