TP-Link td-w8951nd manual TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide

Models: td-w8951nd

1 90
Download 90 pages 39.11 Kb
Page 37
Image 37
If you select Disabled, the DHCP function will not take effect.

TD-W8951ND150Mbps Wireless N ADSL2+ Modem Router User Guide

be able to obtain IP address automatically although the DHCP function is enabled. All the ports are checked by default.

DNS Relay: If you want to disable this feature, you just need to set both Primary and secondary DNS IP to 0.0.0.0. If you want to use DNS relay, you can setup DNS server IP to 192.168.1.1 on their Computer. If not, the device will perform as no DNS relay.

Primary DNS Server: Type in your preferred DNS server.

Secondary DNS Server: Type in your preferred DNS server.

Current Pool Summary: Click the button, then you can view the IP addresses that the DHCP Server gives out.

)Note:

If Use Auto Discovered DNS Server Only is selected in DNS Relay, this modem router will accept the first received DNS assignment from one of the PPPoA, PPPoE or MER/DHCP enabled PVC(s) during the connection establishment. If Use User Discovered DNS Server Only is selected in DNS Relay, it is necessary for you to enter the primary and optional secondary DNS server IP addresses. After type in the address, click SAVE button to save it and invoke it.

¾DHCP Relay: Select Relay, then you will see the next screen (shown in Figure 4-13),and the modem router will work as a DHCP Relay. A DHCP relay is a computer that forwards DHCP data between computers that request IP addresses and the DHCP server that assigns the addresses. Each of the device's interfaces can be configured as a DHCP relay. If it is enabled, the DHCP requests from local PCs will forward to the DHCP server runs on WAN side. To have this function working properly, please run on router mode only, disable the DHCP server on the LAN port, and make sure the routing table has the correct routing entry.

Figure 4-13

DHCP Server IP for Relay Agent: Enter the DHCP server IP Address runs on WAN side.

)Note:

If you select Disabled, the DHCP function will not take effect.

4.3.3 Wireless

Choose “Interface Setup→Wireless” menu, and you will see the Wireless screen (shown in

29

Page 37
Image 37
TP-Link td-w8951nd manual TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide