TP-Link td-w8951nd manual Front Panel, LED Explanation Name Status Indication

TD-W8951ND150Mbps Wireless N ADSL2+ Modem Router User Guide

Chapter 2.Hardware Installation

2.1The Front Panel

Figure 2-1

The LEDs locate on the front panel. They indicate the device’s working status. For details, please

LED Explanation:

Name	Status		Indication
	On		The modem router is powered on.
(Power)
	Off		The modem router is off. Please ensure that the power adapter is
			connected correctly.
	On	ADSL line is synchronized and ready to use.
(ADSL)	Flash		The ADSL negotiation is in progress.
	Off		ADSL synchronization fails. Please refer to Note 1 for
			troubleshooting.
	On	The network is available with a successful Internet connection.
(Internet)	Flash		There is data being transmitted or received via the Internet.
	Off		There is no successful Internet connection or the modem router is
			operating in Bridge mode. Please refer to Note 2 for troubleshooting.
	On	Wireless is enabled but no data is being transmitted.
(WLAN)	Flash		The modem router is sending or receiving data over the wireless
			network.
	Off		Wireless function is disabled.
	On		A wireless device has been successfully added to the network by
			WPS function.
			WPS handshaking is in process and will continue for about 2
(WPS)	Flash		minutes. Please press the WPS button on other wireless devices
			that you want to add to the network while the LED is flashing.
	Off		The WPS function is disabled or the wireless device fails to be added
			to the network in 2 minutes after WPS function is enabled. Please
			refer to 4.3.3.1 WPS Settings for more information.
	On	There is a device connected to this LAN port.
(LAN 1-4)
	Flash	The modem router is sending or receiving data over this LAN port.
	Off	There is no device connected to this LAN port.

4