TP-Link td-w8951nd manual TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide

TD-W8951ND150Mbps Wireless N ADSL2+ Modem Router User Guide

¾Rule Type: Select MAC for the MAC Filter rule.

¾Active: Select “Yes” to make the rule to take effect.

¾MAC Address: Enter the MAC address for the rule.

¾Rule Unmatched: If the current rule can not match, and you select Forward, the modem router will skip the rule and transmit directly. If you select Next, the modem router will find the next filter rule (show in Filter list) to match.

¾IP/MAC Filter Listing: This displays the information about the MAC Filter rules.

To add a MAC Address filtering entry:

For example: If you want to block the PCs with MAC addresses 00-0A-EB-00-07-BE and 00-0A-EB-00-07-5F to access the Internet, you can configure as follows. Presume the rules are both aimed at the interface PVC0, and their indexes are (1, 1) and (1, 2).

Step 1: Select the “IP/MAC Filter” as the Filter Type Selection:

Select the “MAC” as the Rule Type on the Filter screen (show in Figure 4-40).

, Then you can configure the specific rule for the example.

Step 2: Select the IP/MAC Filter Set Index and IP/MAC Filter Rule Index for the rule, then

select the Interface “PVC0”, and select the Direction “Outgoing” for the first rule.

)Note:

If you want to make the rule take effect, please select Yes to active the rule.

Step 3: Enter the “MAC Address” and select the Unmatched rule as “Next”.

Step 4: Finally, click the SAVE to save the entry.

58