Enter Password | TP-Link TL-PA250 guide

TL-PA250AV200+ Powerline Adapter with AC Pass Through

4.1.2 Enter Password

Enter the password of the remote Powerline Adapters, and then you can set the network name of these devices on Privacy configuration homepage. The password can be found on the back of the device.

Select the Powerline Adapter from the list, click the Enter Password button and then the following screen will display.

Enter your Password (Take note of the password format) and click “OK” after setup.

Page 19

Image 19

Contents

TL-PA250 Copyright & Trademarks FCC Statement Important Safety Instructions Contents Introduction Package ContentsSystem Requirement Status Indication LED Indicator Interface Description Physical Interface Connection Instruction Connecting Mechanism Hardware Connection Internet Hardware Connection Computer TL-PA250AV200+ Powerline Adapter with AC Pass Through Installing Management Utility TL-PA250AV200+ Powerline Adapter with AC Pass Through TL-PA250AV200+ Powerline Adapter with AC Pass Through TL-PA250AV200+ Powerline Adapter with AC Pass Through Main Using the Management Utility TL-PA250AV200+ Powerline Adapter with AC Pass Through Rename To upgrade the devices firmware, follow these instructions Enter Password Add Device Reset Privacy Diagnostics TL-PA250AV200+ Powerline Adapter with AC Pass Through About Pair Secure with 128 bits-AES Advanced Feature How to Use the Pair ButtonsSet Up a Secured Powerline AV Network with the Pair Button Create a secured Powerline network using the Pair button： Leave an existing secured Powerline AV Network Join an existing secured Powerline AV Network Ethernet LED does not light up. Ans. Check the following Appendix a Troubleshooting GuidePower LED does not light up. Ans. Check the following Powerline LED does not light up General Appendix B SpecificationsPhysical and Environment

TP-Link TL-PA250 manual Enter Password

Models: TL-PA250

TL-PA250AV200+ Powerline Adapter with AC Pass Through

4.1.2 Enter Password