Figure 5-5 WAN - Static IP

TL-R402MCable/DSL Router User Guide

Figure 5-5 WAN - Static IP

You should type the following parameters into the spaces provided:

¾IP Address - Enter the IP address in dotted-decimal notation provided by your ISP

¾Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP, usually is 255.255.255.0

¾Default Gateway: (Optional) Enter the gateway IP address in dotted-decimal notation provided by your ISP

¾MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. For some ISPs you may need to modify the MTU. But this is rarely required, and should not be done unless you are sure it is necessary for your ISP connection

¾Primary DNS - (Optional) Type the DNS address in dotted-decimal notation provided by your ISP

¾Secondary DNS - (Optional) Type another DNS address in dotted-decimal notation provided by your ISP if provided

3.If you choose PPPoE, you should enter the following parameters (Figure 5-6):

Figure 5-6 WAN - PPPoE

¾User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive

17

Page 22
Image 22
TP-Link manual TL-R402M Cable/DSL Router User Guide, 5WAN - Static IP