TP-Link manual Panel Layout, TL-R402M Cable/DSL Router User Guide, Name, Action, Description

TL-R402MCable/DSL Router User Guide

2.3 Panel Layout

2.3.1 The Front Panel

The front panel of the TL-R402M consists of several LED indicators, which is designed to indicate connections. 2.3.2 The LEDs describes the LEDs on the front panel of the router.

Figure 2-1

2.3.2 The LEDs

Name	Action	Description
M1	Not lit	The router works properly	M1 and M2 are flashing,
	Lit up	The router has a hardware error
			synchronously, the router is
	Not lit	The router has a hardware error
			restoring the factory default
M2	Lit up	The router has a hardware error
			settings.
	Flashing	The router works properly
	Not lit	There is no device linked to the corresponding port
1-4/WAN	Lit up	There is a device linked to the	corresponding port but no
		activity
	Flashing	There is an active device linked to the corresponding port

2.3.3 The Rear Panel

The rear panel contains the following features.

Factory Default Reset button

There are two ways to reset the router's factory defaults:

1.Use the Factory Defaults function on System Tools → Factory Defaults page in the router's Web-based Utility.

2.Use the Factory Default Reset button: First, turn off the router's power. Second, press the default reset button, then turn on the router's power, and hold the reset button until the M1 and M2 LED flash simultaneously (about 3 seconds). At last, release the reset button and wait for the router to reboot.

4