TP-Link manual DHCP Clients List, Address Reservation, TL-R402M Cable/DSL Router User Guide

TL-R402MCable/DSL Router User Guide

¾Default Gateway - (Optional.) Suggest to input the IP address of the LAN port of the router, default value is 192.168.1.1

¾Default Domain - (Optional.) Input the domain name of your network

¾Primary DNS - (Optional.) Input the DNS IP address provided by your ISP. Or consult your

ISP

¾Secondary DNS - (Optional.) Input the IP address of another DNS server if your ISP provides two DNS servers

Note:

To use the DHCP server function of the router, you must configure all computers on the LAN as "Obtain an IP Address automatically" mode. This function will take effect until the router reboots.

5.5.2 DHCP Clients List

This page shows Client Name, MAC Address, Assigned IP and Lease Time for each DHCP Client attached to the router (Figure 5-12):

Figure 5-12 DHCP Clients List

¾Index - The index of the DHCP Client

¾Client Name - The name of the DHCP client

¾MAC Address - The MAC address of the DHCP client

¾Assigned IP - The IP address that the router has allocated to the DHCP client

¾Lease Time - The time of the DHCP client leased. Before the time is up, DHCP client will request to renew the lease automatically

You cannot change any of the values on this page. To update this page and to show the current attached devices, click on the Refresh button.

5.5.3 Address Reservation

When you specify a reserved IP address for a PC on the LAN, that PC will always receive the same IP address each time it accesses the DHCP server. Reserved IP addresses should be assigned to servers that require permanent IP settings. This page is used for address reservation (shown in Figure 5-13).

23