TP-Link manual Appendix B Configuring the PCs, TL-R402M Cable/DSL Router User Guide

TL-R402MCable/DSL Router User Guide

Appendix B: Configuring the PCs

In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows 95/98. First make sure your Ethernet Adapter is working, refer to the adapter’s manual if needed.

1.Install TCP/IP component

1)On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.

2)Double-click the Network icon, click on the Configuration tab in the appearing Network window.

3)Click on the Add button. Select Protocol, and then click Add.

Figure 8 Add Network Protocol

4)Under Manufacturers on Select Network Protocol page, highlight Microsoft. Under Network Protocols, highlight TCP/IP. Click OK. TCP/IP protocol will take effect after reboot.

Figure 9 Select Network Protocol

2.Configure TCP/IP for your computer

1)On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.

2)Double-click the Network icon, highlight the bound TCP/IP tab in the Network window that appears. An example is shown in the following figure:

44