TP-Link manual TL-R402M Cable/DSL Router User Guide, 8WAN - L2TP

TL-R402MCable/DSL Router User Guide

Figure 5-8 WAN – L2TP

For more details, please refer to your ISP.

¾User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive

¾Connect/Disconnect - Click the button, you can handle the on-line connection or disconnection

¾Dynamic IP/Static IP - Enter the IP address in dotted-decimal notation provided by your ISP

¾Server IP Address/Name - Please type the correct Server IP Address/Name which your ISP provided

¾MTU Size (in bytes) - The default value is 1460, which is usually fine. For some ISPs, you need modify the MTU. This should not be done unless you are sure it is necessary for your

ISP

¾Max Idle Time - If you want your Internet connection to remain active at all times, enter 0 in the Max Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before your Internet connection terminates. (This setting is available just for “Connect on demand” and “Connect Manually”)

¾Connect on demand - You can configure the router to disconnect your Internet connection after a specified period of the Internet connectivity (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the router to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button. If you want your

20