Trane PKGP-PRC001-EN Performance, Data12½Ton, HP Standard Motor & Drive, HP Standard Motor & High

Performance

Data(12½Ton)

Table PD-6 — Evaporator Fan Performance — 12½ Ton — WC*150B

								External Static Pressure (Inches of Water)
		.10		.20		.30		.40		.50		.60	.70				.80	.90		1.00
CFM	RPM	BHP	RPM	BHP	RPM	BHP	RPM	BHP	RPM	BHP	RPM	BHP		RPM	BHP	RPM	BHP	RPM	BHP	RPM	BHP
				3 HP Standard Motor & Field Supplied Low Static Drive (1)											3 HP Standard Motor & Drive
4000	—	—	506	0.69	537	0.80	568	0.92	599	1.03	631	1.15	662		1.26	694	1.37	726	1.48	756	1.59
4500	511	0.87	541	0.98	572	1.09	603	1.21	634	1.32	664	1.43	693		1.55	721	1.68	749	1.81	777	1.94
5000	551	1.16	580	1.31	612	1.39	640	1.51	672	1.67	700	1.78	727		1.90	754	2.03	779	2.18	805	2.32
5500	597	1.54	626	1.68	656	1.80	682	1.89	709	2.04	738	2.22	763		2.34	788	2.46	813	2.60	837	2.76
6000	644	1.99	674	2.10	699	2.28	727	2.37	749	2.48	774	2.66	801		2.85	825	3.00	848	3.13	871	3.27
														3 HP Standard Motor & High
														StaticDriveAccessory

Table PD-6 — Evaporator Fan Performance — 12½ Ton — WC*150B — Continued

									External Static Pressure (Inches of Water)
		1.10		1.20		1.30		1.40		1.50		1.60		1.70		1.80		1.90		2.00
	CFM	RPM	BHP	RPM	BHP	RPM	BHP	RPM	BHP	RPM	BHP	RPM	BHP	RPM	BHP	RPM	BHP	RPM	BHP	RPM	BHP
			3 HP Standard Motor & Drive									3 HP Standard Motor & High Static DriveAccessory
4000		786	1.70	815	1.82	843	1.94	870	2.06	897	2.20	923	2.34	949	2.48	974	2.64	998	2.80	1022	2.96
4500		806	2.06	833	2.18	860	2.30	886	2.43	912	2.56	937	2.69	962	2.83	986	2.98	1010	3.13	1033	3.28
5000		830	2.47	855	2.61	880	2.74	905	2.88	930	3.01	954	3.15	978	3.29	1001	3.43	1024	3.58	1047	3.73
5500		860	2.92	883	3.08	906	3.24	929	3.39	952	3.54	975	3.69	997	3.84	1020	3.99	1042	4.14	1064	4.29
6000		893	3.43	915	3.59	936	3.77	957	3.94	978	4.12	999	4.29	1020	4.46	1041	4.62	1062	4.78	1083	4.94
											5 HP Oversized Motor & Drive
Notes:
Fan motor heat (MBH) = 3.15 x Fan BHP.
Data includes pressure drop due to wet coils and filters.
No accessories or options are included in pressure drop data.
Refer to Table PD-13 to determine add’l static pressure drop due to other options/accessories.
Notes:
1. Field supplied fan sheave BK115 required. Field supplied belt may be necessary.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions, Using the full horsepower range of our fan motors as shown in our tabulated data will not result in nuisance tripping or premature motor failure. Our product's warranty will not be affected.

PKGP-PRC001-EN 17