TCONT802AS32DA TOUCH SCREEN AND TCONT803AS32DA TOUCH SCREEN WITH DEHUMIDIFICATION
INSTALLER SETUP
The comfort control works with many different system types. To operate correctly, the comfort control must be set up to operate the installed heating and/or cooling system.
Follow these steps to enter the Installer Setup:
1.Be sure the comfort control is powered.
2.Press and release the System Key.
THU
FAN
ON Inside 
Set To 
AUTO
Following
SYSTEM
Schedule
EM HEAT
OFF | A |
| |
COOL | M |
SCHED HOLD CLOCK SCREE
M22647
3.Press and hold the two blank keys on either side of the center blank key for approximately five seconds until screen changes.
MO | TU | WE | TH | FR | SA | SU |
| Inside |
|
| Set To |
|
|
SYSTE |
|
|
| Following |
| |
|
|
| Schedule |
| ||
M
EM
HEAT
4.Release the two blank keys when the screen on the comfort control matches the screen below.
DONE
M22649
5.See screen below to review how the comfort control keys are used during Installer Setup. See Table 4 for the Installer Setup Numbers and Settings.
| ADVANCE TO NEXT |
INSTALLER | INSTALLER SETUP |
| |
SETUP | CURRENT |
NUMBER | SETTING |
MON | WED THUU FRI SATA SUN |
OFF
DONE | CANC |
DONE
PRESS TO EXIT | CHANGE THE |
|
INSTALLER SETUP | CURRENT |
|
M22648 | SETTING | M22650 |
|
6.Press the Done key to exit the Installer Setup screen.
| Pub. No. |
11 |
