Trango Broadband High Density Mesh System user manual Configuring DHCP Server via CLI Setup

HD Mesh Node

Configuring DHCP Server via CLI Setup

Following the menu option the following information will need to be provided in order to create the DHCP Server

•DHCP server interface:

•DHCP address space:

•gateway for DHCP network:

•DHCP relay

•addresses to give out:

•DNS servers:

•lease time:

Example of a configured DHCP server.

+s - setup dhcp server p - setup pppoe client

t - setup pptp client

*x - exit menu your choice: s

dhcp server interface: ether6

dhcp address space: 192.168.0.0/24

gateway for dhcp network: 0.0.0.1

dhcp relay: 0.0.0.0

addresses to give out: 0.0.0.2-255.255.255.254

dns servers: 192.168.1.1,10.8.0.2

lease time: 3d

#Adding DHCP server IP address pool

/ip pool add name=dhcp-pool-1 ranges=0.0.0.2-255.255.255.254 #Adding DHCP network

/ip dhcp-server network add address=192.168.0.0/24 \ dns-server=192.168.1.1,10.8.0.2 gateway=0.0.0.1 comment="added by setup"

#Adding DHCP server

/ip dhcp-server add interface=ether6 address-pool=dhcp-pool-1 \ lease-time=3d00:00:00 disabled=no

r - reset all router configuration + l - load interface driver

+ a - configure ip address and gateway + d - setup dhcp client

+ s - setup dhcp server p - setup pppoe client t - setup pptp client

*x - exit menu

your choice: x

[Safe Mode released]

Setup completed successfully. [admin@HDMESH] >

Trango Broadband Wireless — High Density MESH page 32