HD Mesh Node
Section 6 Default Configuration
The HD Mesh node is configured with the first 5 ports as router ports, each with their own IP address. The ports are also configured to give out DHCP IP addresses. Ports 6, 7, and 8 are configured to act as a single bridge. The bridge is configured with an IP Address and also as a DHCP server. The wireless card is configured with its own IP address and also as a DHCP Server. Port 9 is configured as a DHCP client. (Figure 41)
Port | IP address | Bridge | Comments |
|
|
| DHCP Server issues IP addresses from |
Ether 1 | 192.168.1.1/24 | No | DHCP range |
|
|
| DHCP Server issues IP addresses from |
Ether 2 | 192.168.2.1/24 | No | DHCP range |
|
|
| DHCP Server issues IP addresses from |
Ether 3 | 192.168.3.1/24 | No | DHCP range |
|
|
| DHCP Server issues IP addresses from |
Ether 4 | 192.168.4.1/24 | No | DHCP range |
|
|
| DHCP Server issues IP addresses from |
Ether 5 | 192.168.5.1/24 | No | DHCP range |
Ether 6 | N/A | Yes | Bridge port 1 |
Ether 7 | N/A | Yes | Bridge port 1 |
Ether 8 | N/A | Yes | Bridge port 1 |
Ether 9 |
| No | DHCP Client- NAT |
WLAN 1 | 192.168.1.10/24 | No | 802.11b/g SSID: HDMESH |
Bridge 1 | 192.168.7.1/24 |
| DHCP Server issues IP addresses from |
| DHCP range |
Figure 41
Trango Broadband Wireless — High Density MESH | page 33 |
