18 HARDWARE INSTALLATION

2.4.6 Wake-on-LAN Connector (3-pin WOL)

This connector connects to LAN cards with a Wake-on-LAN output. The system can be Powered Up when a wake-up packet or signal is received from the LAN card.

NOTE: This function requires that the “Wake-Up by PCI & WOL” function in the “Power Management Setup” is set to “Enabled” and that your system has an ATX power supply with at least 720mA +5V standby power.

Transcend

Wake-on-LAN Connector

W O L

P M E

G N D

+5V Standby

Page 22
Image 22
Transcend Information TS-USL3/N, TS-USP3/N user manual Wake-on-LAN Connector 3-pin WOL