Transcend Information TS-USP3/N, TS-USL3/N user manual Suspend Mode LED Lead 2-pin Sled

HARDWARE INSTALLATION 17

Suspend Mode LED Lead (2-pin S_LED)

The S_LED will light when the suspend mode works.

Pin2 : +5V

Pin4 : GND

Hard Disk LED Lead (2-pin HDD_LED)

This 2-pin connector connects to the LED of the hard disk drive. The LED lights up when a HDD is active.

Pin6 : +5V

Pin8 : GND

Reset Switch Lead (2-pin RESET)

This 2-pin connector connects to the case-mounted reset switch for rebooting your computer without turning off and on your power switch.

Pin14 & Pin16

Soft Power-Off Lead (2-pin SOFT_OFF)

Attach the SOFT_OFF switch of the panel to this connector. Use the switch to Power On/Off

your system.

Pin18 & Pin20