34 | BIOS SETUP |
•Video BIOS Cacheable
Selecting “Enabled” allows caching of the video BIOS. This action can increase system performance.
•Memory Hole At 15M-16M
Enabling this feature reserves memory address space (between 15 and 16MB) to ISA expansion cards that specifically require this setting. This makes between 15 and 16MB of memory unavailable to the system. Expansion cards can only access memory up to 16MB. The default setting is “Disabled”.
•CPU Latency Timer
The option determines the way that 815 does with the deferrable processor cycle.
•Delayed Transaction
PCI access speed is faster than ISA. So PCI will release the master bus to the ISA interface for accessing data. Then the master bus control will go back to PCI again.
•Display Cache Frequency
100/133 MHz depends on your AIMM Card.
•AGP Graphics Aperture Size
The Aperture is a portion of the PCI memory address range dedicated for graphics memory address space. Access to the aperture range is forwarded to AGP without translation. Available options are 64MB and 32MB.
•System Memory Frequency
Default is Auto. When the CPU is 133MHz you can choose 100/133MHz, but when the CPU is 100MHz, only the 100MHz selection will work.
•On-Chip Video Window Size
You can select the size of mapped memory for the VGA/AGP driver to use. The choices: “64MB”, “32MB”, and “Disabled”.
Onboard Display Cache Setting (Only for AIMM)
This field is displayed only if there is AIMM Installed.
•Initial Display Cache
Select “Enabled” if you want to use the onboard display cache. The suggested selection is “Enabled”.
