Transcend Information TS-USL3, TS-USL3/N, TS-USP3, TS-USP3/N BIOS SETUP 29

BIOS SETUP 29
• Precomp: Write precompensation cylinder
• Landing Zone: Landing zone
• Sector: Number of sectors
• Drive A/Drive B
Select the correct type of diskette drive(s) installed in the computer.
- None: No diskette drive installed
- 360K, 5.25 in.: 5-1/4-inch standard drive; 360 kilobyte capacity
- 1.2M, 5.25 in.: 5-1/4-inch high-density drive; 1.2 megabyte capacity
- 720K, 3.5 in.: 3-1/2-inch double-sided drive; 720 kilobyte capacity
- 1.44M, 3.5 in.: 3-1/2-inch double-sided drive; 1.44 megabyte capacity
- 2.88M, 3.5 in.: 3-1/2-inch double-sided drive; 2.88 megabyte capacity
• Floppy Mode 3 Support
Supports some particular Japanese floppy drives (3-1/2-inch drive with 1.2 megabyte capacity).
• Video
Select the type of primary video subsystem in your computer. The BIOS will detect the correct
video type automatically. The BIOS supports a secondary video subsystem, but do not select
it in this Setup.
- EGA/VGA: Enhanced Graphics Adapter/Video Graphics Array. For EGA, VGA, SEGA,
SVGA or PGA monitor adapters.
- CGA 40: Color Graphics Adapter, powers up in 40-column mode.
- CGA 80: Color Graphics Adapter, powers up in 80-column mode.
- MONO: Monochrome adapter, including high resolution.
• Halt On
During POST, the computer stops if the BIOS detects a hardware error. Y ou can set the BIOS
to ignore certain errors during POST and continue the boot-up process. The followings are
the selections:
- All Errors: If the BIOS detects any non-fatal errors, POST stops and prompts you to
take corrective action.
- No Errors: POST does not stop for any error.
- All, But Keyboard: If the BIOS detects any non-fatal errors except keyboard, POST
stops and prompts you to take corrective action.