Transcend Information TS-USP3/N Use IR Pins, Onboard Parallel Port, Parallel Port Mode

BIOS SETUP 39

•Use IR Pins

This option selects IR transmission routing. Two choices are:

RxD2,TxD2 -> COMB Connector

IR-Rx2Tx2 -> IR Connector

•Onboard Parallel Port

Select a logical LPT port name and matching address for the physical parallel (printer) port. The choices: “378/IRQ7”, “278/IRQ5”, “3BC/IRQ7” and “Disabled”.

•Parallel Port Mode

This field allows you to set the operation mode of the parallel port.

-SPP: Allows normal-speed operation, but in one direction only.

-EPP: Allows bi-directional parallel port operation at maximum speed.

-ECP: Allows DMA and bi-directional operation. It is faster than EPP mode.

-ECP + EPP: Allows normal speed operation in two-way mode.

•EPP Mode Select

Select EPP port type “1.7” or “1.9”.

•ECP Mode Use DMA

Assign DMA channel “1” or “3” to the port for ECP mode operation.

•PWR-ON After PWR-Fail

Choose if you want the system to automatically Power On after the power has failed.

-Off: Disable this function

-On: Enable this function

-Former-Sts: Not only to Power On the system, but also to return it to its former status.

•Game Port Address

Set Joystick Game Port Address. The choices: “Disabled”, “201” , and ”290”

•Midi Port Address

Set Midi Port Address. The choices: “Disabled”, “330” , “300” and ”290”

•Midi Port IRQ

Assign IRQ 5 or 10 to the Midi Port.